Now,the technology is more and more developed,so the engraving machines are more and more advanced.But even if the engraving machines are advanced,they are also need to be maintained.Then the following, I will introduce some methods about how to maintain cnc engraving machine.
1:When the cnc engraving machine is working,you should make the spindle motor’s speed control in an appropriate range.Make sure the motor can have a long time life.
2:Once after work,in order to the next working is smoothly,you should clean the whole cnc engraving machine.Specifically the work table and rail.
3:Regularly clean the control box,because dust is the biggest killer of the circuit board.
4:Regularly oiling to the cnc engraving machine,oiling the cnc engraving machine once every two weeks is the best.Make the cnc engraving machine work slowly after oiling it.
5:When the cnc engraveing machine is not in use,if the room temperature is too low,you can pour the water from water tank,prevent frozen the water tank and pipes.
6:Regularly defragment the hard disk and killing virus to optimize the computer system.
7:Check the oil and coolant, timely additions and replacement.
8:After work,promptly shut down all power supplies.
If you do these requirements, your cnc engraving machine will be able to bring you more benefits.