BW-4000I PVC Banner Welder & Jointer Latest Version  Good companion for Solvent Printer----Banner Heat Banner Welder Machine may join disjunctive advertising poster surface without Glue. Application

Bond up disjunctive flat painting surface made of heat-melted material, such as PVC cloth, PE fabric Canvas, outdoor poster banner, plastic surface, Sailcloth...etc.

Upgrade

Parameters Model BW-4000I Power Supply 220V-240V/50HZ or 110V-60HZ Power Consumption Max power 1500W,average 600W Adjustable Heating Temperature 50-399℃ Display: 5-230 Adjustable Moving Speed 0.3-7.5M/min Display:0-30 Adjustable Blowing rate 40%-100% Display:12-28 Sleep when no Operation 15 min Dimension 420mmx280mmx220mm(LxWxH) Gross Weight 10kg Comes with

Method

Step 1) Immobilize both ends of each disjunctive poster surface with something such as stick belt or clamp, and leave about 30-40mm wide overlap edge on each disjunctive poster surface edge;  Step 2) Turn on the machine, prepare warm up about 2 minutes;  Step 3) Bring up the machine, and place the roll at the end of the overlap edge;  Step 4) According to quality and thickness of the poster surface material, consider the ground circumstance, adjust the proper temperature and speed, handle the Fuse machine Gun down and insert it between the two poster banner edges, then the machine start running, after go pass the overlap edge, the two disjunctive banners will be well joined in one.

Download    banner welder instruction.pdf

Seam Result::